Huitian Technology Development Co., Limited

High quality product, professional service, being the core supplier in industry!

Two Part Silicone Adhesive For Power Supplies, Connectors, Sensors, Industrial Controls

Two Part Silicone Adhesive For Power Supplies, Connectors, Sensors, Industrial Controls

5296 silicone ( potting sealant /potting adhesive/potting silicone/potting glue/potting sealant adhesive/electronic sealant) for General potting applications: power supplies, connectors, sensors, industrial controls 5296 two-part silicone compound ●INTRODUCTION ·5290 is a two part...

Send Inquiry
Product Details
Material: Silicone Color: Grey
Density: 1.8 Viscosity: 4500
Mix Ratio: 1:1 Work Temperature: -50~200

 

5296 silicone (potting sealant/potting adhesive/potting silicone/potting glue/potting sealant adhesive/electronic sealant) for General potting applications: power supplies, connectors, sensors, industrial controls

5296 two-part silicone compound


●INTRODUCTION
·5290 is a two part additional silicone compound (potting sealant/potting adhesive/potting silicone/potting glue/potting sealant adhesive/electronic sealant) . It has a long used time at room temperature and if heated it cures more quickly. It has excellent thermal stability, especially high temperature-stability. When it has completely cured , the rubber elasticity can maintain at a long temperature field (-50 ~ 200 ℃ ) ,and its insulating quality is also very excellent too. It has very low thermal expansion, good water resistant
and ageing resistant. It has low viscosity and high thermal conductivity, and is compatible with most electrical insulating materials.
●APPLICATIONS
·General potting applications: power supplies,connectors, sensors, industrial controls, transformers, amplifiers, high voltage resistor packs, relays

●HOW TO USE
·Before mixing, part A and part B should be stirred adequately in container.
·Supplied as two-part liquid component kits comprised of Part A/Part B to be mixed in a
1:1 ratio by weight or volume; automated mixing and dispensing; manual mixing.
·After mixing,it can be heated to accelerate the cure rating.

 

●NOTICE
It can not cure if contact with three substance therein after:
·N, S, P organic compound
·Sn,Pb,Hg,As ionic compound.
·Alkyne and ethylene compound.

 

●TYPICAL PROPERTIES
●PACKAGING AND SHELF-LIFE
·PACKAGING: 5296LA6:25kg
5296LB6:25kg
·SHELF-LIFE:12 months
As Supplied(25℃,65%RH)
Part 5296 A 5296 B
Color Gray White
Viscosity(mPa·s) 5500 5500
SpecificGravity(g/cm3) 1.62 1.62
MixedGravity(g/cm3) 1.62
Properties after mixing(25℃,65%RH)
Mixing Ratio(by weight) A:B = 1:1
Color Gray
Mixture viscosity(mPa·s) 5500
Curing time(25℃,min) 60
Curing time(80℃,min) 15
Cured,25℃,65%RH
Durometer Hardness(Shore A) 55
Thermal Conductivity(W/m·K) 0.68
Electrical
Volume resistivity(Ω·cm) ≥1.0×1014
Dielectric strength(kV/mm) ≥21
Dielectric constant at 1.2MHz 2.8

 

●PACKAGING AND SHELF-LIFE (potting sealant/potting adhesive/potting silicone/potting glue/potting sealant adhesive/electronic sealant)
·PACKAGING: 5296LA6:25kg
5296LB6:25kg
·SHELF-LIFE:12 months

 

Hot Tags: two part silicone adhesive for power supplies, connectors, sensors, industrial controls, China, manufacturers, suppliers, factory, price, buy, high quality, made in China
Related Products
Inquiry