High Strength Thread Locking Sealing Anaerobic Adhesive
The thread locking anaerobic adhesive is single component, high viscosity, high strength, non-separating, good performance on medium –resistance, curing during air free situation when two metal surface connected tightness
Technical Data Sheet (7277 thread locking sealing anaerobic adhesive )
7277 thread locking anaerobic adhesive is single component, high viscosity, high strength, non-separating, good performance on medium –resistance, curing during air free situation when two metal surface connected tightness.
The thread locking sealant with high viscosity and strength.
The thread locker for locking and sealing the thread under M36, and prevent to rust.
Before curing features
4# 20 rpm
Flashing point (℃)
Max. filling gap (mm)
Fixing time (min)
After curing features
Complete cured during room temperature (h)
Destabilizing moment (N.m) (GB/T18747.1)
Average Dismantling moment (N.m) (GB/T18747.1)
Direction for using:
Cleaning: Clean the surface of item which need to be dispensed, remove greasy dirt etc and dry, suggest to use 7755 cleaning agent to improve the cleaning efficient
Dispensing: Shake up before using, dispensing the adhesive on the thread, sufficient to fill all the gap between thread, and tightness.
Curing: The best sealing performance if the gap small, will affect the curing speed if the gap big, suggest to use 7769 accelerant for big gap case, to improve the sealing effect, in order to achieve the best performance, suggest the curing time more than 24 hours.
Note: can’t fill back the original packing if the adhesive polluted, and sealing the hole if not complete used.
Dismantle temperature: dismantle available if heating 150℃.
18 months during 8-28℃ and keep away from sunshine and damp.
727701, 50ml/bottle, 10 bottles/box, 80 bottles/carton
727703, 250ml/bottle, 10 bottles/box
1, Not allow to fill back to original packing if the adhesive polluted, will effect the performance.
2, Not suitable for plastic, pure oxygen or oxygen enrichment situation, can’t used for chlorine or other strong oxidizing property material.
3, Keep away from children.
3, Scrubing and washing with water immediately if the silicone spills into eyes or on the skin, and make a further handling. Suggest to apply in good ventilation place.
4, Please contact us if any doubt or questions during operation.