Huitian Technology Development Co., Limited

High quality product, professional service, being the core supplier in industry!

Home > Knowledge > Content
How To Apply Acrylic Adhesives To Surfaces
- Jan 07, 2018 -

The acrylic adhesives are made in two forms, the liquid, and pastes. The industrial acrylic adhesives are high strength and there is no preparation of any surfaces needed. The 3m scotch-weld on is one of the best acrylic bonds that you could come across. There an acrylic adhesive that is known to have a medium stability, these adhesives have a high-temperature epoxy, UV curing and is a solvent. Many of the medium adhesives have general uses; there is no peeling of any sorts that will occur, however with the plastic adhesives, there might be this problem. The acrylic adhesives is renowned as one of the top industrial acrylic adhesives that are used by almost everyone today.


There is a specific way to which you should apply this type of bonding agent it is more frequently used in conjunction with wood, glass, metal as well as waterproof items. The fact that it is UV curing is something that attracts the attention of many in the industrial field. There are steps that you have to follow and these are; you have to make sure that all surfaces that you would ultimately bond with this high-temperature epoxy, all wood surfaces that you are to use, should be clean of any paints as well as varnish and at the same time, the metal and/or glass surfaces have to be cleaned of any debris as well as dirt. You should make use of the mixing dispenser to make the application of the liquid, ensure that the application is liberal this is a necessity.


There is the type that would not come with a dispenser, in this case, the liquid has to be applied first, and then you place the paste. This happens on the two different side of the material that you need to bond. The variant of the 3m scotch-weld on is more for the use of electrical equipment and is considered as a more advanced acrylic adhesive in this class. Once you have both pieces well glued, you then have to make use of a clamp to ensure that it stays in place. This type of epoxy resin does take more or less five minutes to bond, for best results, leave it clamped overnight to ensure that it does indeed stay in place. Once the overnight setting of this solvent is done, you can then unclamp the object, what you then have to do is take all excess adhesive off; make use of acetone will come in handy here.


There are many ways in which you could use the variation of bonding material, besides the acrylic adhesive there is also the resin glue powder, this works pretty much the same way as the paste acrylic bonding. The application of this is too easy, and all that you have to pay attention to is the instructions that come with it. It is of the essence that you follow it step by step, as there can be repercussions of some sorts.