Huitian Technology Development Co., Limited

High quality product, professional service, being the core supplier in industry!

Home > Knowledge > Content
How to apply bathroom sealant
- Nov 18, 2017 -

Step 1. Prepare the tile surface

Before you start, give your tiles a good clean. You want to make sure the area is clear of any dust or debris around the tiles. 

1.jpg

Step 2. Cut the silicone nozzle

Cut the silicone nozzle at a 45° angle so that the silicone runs smoothly along the surface of the join. In this case, we are using a grey coloured silicone along the base to match the floor tiles and a white silicone up the wall to match the wall tiles.

2.jpg

Step 3. Apply the silicone along the join

Put your silicone container into the caulking gun. Apply the silicone generously along the join, starting from the centre and working your way out.  

3.jpg

Step 4. Make a smooth silicone join

Once you have applied the silicone, spray the area with water. Then run the end of popsicle stick along the join to smooth it over. If any clean up is required use turpentine or a silicone remover to take away excess silicone.

4.jpg