RTV Bonding And Sealing Silicone For Solar Panel
Technical Data Sheet (906Z RTV bonding and sealing Silicone) Product Description: Single component, thixotropic and paste type, white color, room temperature vulcanized silicone rubber. Produce Features: Room temperature neutral curing, deep seated curing fast, surface can be cleaned after four...
Technical Data Sheet (906Z RTV bonding and sealing Silicone)
Single component, thixotropic and paste type, white color, room temperature vulcanized silicone rubber.
Room temperature neutral curing, deep seated curing fast, surface can be cleaned after four hours.
Good sealing performance, good bonding capacity for aluminum, glass, TPT/TPE, terminal box plastic PPO/PA..
Anti-yellowing, 1000 hours aging resistance tested during 85℃, 85%RH, and without yellowing.
Good mechanical property, good compatibility with with EVA.
UL certificated, E248611, meet EU ROHS environmental regulation, with SGS, TUV tested report..
Solar photovoltaic aluminum frame sealing.Terminal box with TPT/TPE back film bonding and sealing. Bonding metal frame on the back side of thin film solar cell with glass.
Features before curing
White and grease type
Density (g/cm3 GB/T 13354)
Tack free time (surface drying time)
mi(25℃,50%RH) (GB/T 13477.5)
Viscosity g /15s
Features after curing (during 25℃,55%RH, 7 days after curing)
Tensile strength Mpa GB/T 528
Elongation at break % GB/T 528
Shear strength Mpa (GB/T 7124)
Hardness (Shore A) GB/T 531.1
Volumn resistivityΩ.cm (GB/T 1692)
Dielectric strength KV/mm (GB/T 1695)
Working temperature ℃
Direction for using:
Cleaning: Clean the surface of item which need to be dispensed, remove rust, dust and greasy dirt etc.
Dispensing: Dispensing the silicone on the clean surface.
Curing: Keep the item in the open air, curing from outside to inside after peel forms. Curing 24 hours during room temperature and 55% humidity, cured depth 2～4mm, the depth incresed along with time. Curing depth 6mm after 7 days, if more than 6mm requested need to use two components silicone.
12 months during 8-28℃ and keep away from sunshine and damp.
Tighten the cap and sealing the mouth if silicone is not complete used. Normal situation if small skinning on the mouth during the storage, can be normal used after removing the skinning, no any effect on the performance.
9061E3, 310ml/tube, 30 soft tubes/carton
9061E4, 310ml/tube, 25tubes/carton
9061E5, 400ml/tube, 28 soft tubes/carton
9061E6, 600ml/tube, 20 soft tubes/carton
9061E8, 20kg/drum, 1 drum/carton
9061E9, 230kg/drum, 2 drums/carton
1, Keep away from children.
2, Suggest to apply in good ventilation place.
3, Scrubing and washing with water immediately if the silicone spills into eyes or on the skin, and make a further handling.
4, Please contact us if any doubt or questions during operation.
5, Safety information please refer MSDS.